Initial commit: Add WireGuard VPN provisioning system

ansible/group_vars/vpn_servers/vars.yml

@@ -0,0 +1,4 @@
+wireguard_interface: wg0
+wireguard_port: 51820
+wireguard_network: 10.0.0.0/24
+server_public_ip: "{{ ansible_host }}"

ansible/playbooks/templates/client.conf.j2

@@ -0,0 +1,10 @@
+[Interface]
+PrivateKey = {{ client_private_key.stdout }}
+Address = {{ client_ip }}/24
+DNS = 1.1.1.1
+
+[Peer]
+PublicKey = {{ server_pubkey }}
+Endpoint = {{ ansible_host }}:51820
+AllowedIPs = 0.0.0.0/0
+PersistentKeepalive = 25

ansible/playbooks/templates/server.conf.j2

@@ -0,0 +1,10 @@
+[Interface]
+Address = {{ server_ip }}
+ListenPort = {{ server_port }}
+PrivateKey = {{ server_private_key.stdout }}
+
+# Enable IPv4 forwarding
+PostUp = sysctl -w net.ipv4.ip_forward=1
+# NAT configuration (adjust eth0 to your outbound interface if different)
+PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
+PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE

ansible/playbooks/vpn_provision.yml

@@ -0,0 +1,118 @@
+---
+- name: Provision WireGuard VPN for new client
+  hosts: vpn_servers
+  become: yes
+  vars:
+    client_dir: /etc/wireguard/clients
+    wg_interface: wg0
+    server_dir: /etc/wireguard
+    server_ip: 10.8.0.1/24
+    server_port: 51820
+    server_endpoint: "{{ ansible_host | default(inventory_hostname) }}"
+    
+  tasks:
+    - name: Debug invoice ID
+      debug:
+        msg: "Processing invoice ID: {{ invoice_id }}"
+        
+    # Server Setup Tasks
+    - name: Check if server keys exist
+      stat:
+        path: "{{ server_dir }}/{{ wg_interface }}.conf"
+      register: server_config
+        
+    - name: Generate server private key if not exists
+      shell: wg genkey
+      register: server_private_key
+      when: not server_config.stat.exists
+      
+    - name: Save server private key
+      copy:
+        content: "{{ server_private_key.stdout }}"
+        dest: "{{ server_dir }}/private.key"
+        mode: '0600'
+      when: not server_config.stat.exists
+      
+    - name: Generate server public key
+      shell: "cat {{ server_dir }}/private.key | wg pubkey"
+      register: server_public_key
+      when: not server_config.stat.exists
+      
+    - name: Save server public key
+      copy:
+        content: "{{ server_public_key.stdout }}"
+        dest: "{{ server_dir }}/public.key"
+        mode: '0644'
+      when: not server_config.stat.exists
+      
+    - name: Create initial server config
+      template:
+        src: templates/server.conf.j2
+        dest: "{{ server_dir }}/{{ wg_interface }}.conf"
+        mode: '0600'
+      when: not server_config.stat.exists
+      
+    # Client Setup Tasks
+    - name: Ensure client directory exists
+      file:
+        path: "{{ client_dir }}/{{ invoice_id }}"
+        state: directory
+        mode: '0700'
+        
+    - name: Generate client private key
+      shell: wg genkey
+      register: client_private_key
+      no_log: true
+      
+    - name: Save client private key
+      copy:
+        content: "{{ client_private_key.stdout }}"
+        dest: "{{ client_dir }}/{{ invoice_id }}/private.key"
+        mode: '0600'
+      no_log: true
+      
+    - name: Generate client public key
+      shell: "echo '{{ client_private_key.stdout }}' | wg pubkey"
+      register: client_public_key
+      
+    - name: Save client public key
+      copy:
+        content: "{{ client_public_key.stdout }}"
+        dest: "{{ client_dir }}/{{ invoice_id }}/public.key"
+        mode: '0644'
+        
+    - name: Read server public key
+      shell: "cat {{ server_dir }}/public.key"
+      register: server_public_key_read
+      changed_when: false
+        
+    - name: Get next available IP
+      shell: |
+        last_ip=$(grep -h '^Address' {{ client_dir }}/*/wg0.conf 2>/dev/null | tail -n1 | grep -oE '[0-9]+$' || echo 1)
+        echo $((last_ip + 1))
+      register: next_ip
+      
+    - name: Generate client config
+      template:
+        src: templates/client.conf.j2
+        dest: "{{ client_dir }}/{{ invoice_id }}/wg0.conf"
+        mode: '0600'
+      vars:
+        client_ip: "10.8.0.{{ next_ip.stdout }}"
+        server_pubkey: "{{ server_public_key_read.stdout }}"
+        
+    - name: Add client to server config
+      blockinfile:
+        path: "{{ server_dir }}/{{ wg_interface }}.conf"
+        marker: "# {mark} ANSIBLE MANAGED BLOCK FOR {{ invoice_id }}"
+        block: |
+          [Peer]
+          PublicKey = {{ client_public_key.stdout }}
+          AllowedIPs = 10.8.0.{{ next_ip.stdout }}/32
+      notify: restart wireguard
+        
+  handlers:
+    - name: restart wireguard
+      service:
+        name: wg-quick@{{ wg_interface }}
+        state: restarted

app/handlers/webhook_handler.py

@@ -0,0 +1,182 @@
+# app/handlers/webhook_handler.py
+
+import sys
+from pathlib import Path
+sys.path.append(str(Path(__file__).resolve().parent.parent.parent))
+
+from flask import Flask, request, jsonify
+import subprocess
+import os
+import logging
+import json
+from pathlib import Path
+import hmac
+import hashlib
+import yaml
+import traceback
+import tempfile
+from dotenv import load_dotenv
+from app.utils.vault_helper import decrypt_vault_file
+
+# Load environment variables from .env file
+load_dotenv()
+
+# Configure logging
+logging.basicConfig(
+    level=logging.INFO,
+    format='%(asctime)s - %(name)s - %(levelname)s - %(message)s'
+)
+logger = logging.getLogger(__name__)
+
+app = Flask(__name__)
+
+# Update paths for new structure
+BASE_DIR = Path(__file__).resolve().parent.parent.parent
+PLAYBOOK_PATH = BASE_DIR / 'ansible' / 'playbooks' / 'vpn_provision.yml'
+VAULT_PATH = BASE_DIR / 'ansible' / 'group_vars' / 'vpn_servers' / 'vault.yml'
+INVENTORY_PATH = BASE_DIR / 'inventory.ini'
+
+def get_vault_values():
+    """Get decrypted values from Ansible vault"""
+    try:
+        # Use vault helper to decrypt contents
+        vault_contents = decrypt_vault_file(VAULT_PATH)
+        vault_data = yaml.safe_load(vault_contents)
+        
+        # Construct full webhook URL
+        vault_data['webhook_full_url'] = (
+            f"{vault_data['btcpay_base_url']}"
+            f"{vault_data['btcpay_webhook_path']}"
+        )
+        
+        return vault_data
+        
+    except Exception as e:
+        logger.error(f"Error reading vault: {str(e)}")
+        raise
+
+def verify_signature(payload_body, signature_header):
+    """Verify BTCPay webhook signature"""
+    try:
+        vault_values = get_vault_values()
+        secret = vault_values['webhook_secret']
+        
+        logger.debug(f"Secret type in verify_signature: {type(secret)}")
+        
+        expected_signature = hmac.new(
+            secret.encode('utf-8'),
+            payload_body,
+            hashlib.sha256
+        ).hexdigest()
+        
+        return hmac.compare_digest(
+            signature_header.lower(),
+            f"sha256={expected_signature}".lower()
+        )
+    except Exception as e:
+        logger.error(f"Signature verification failed: {str(e)}")
+        return False
+
+@app.route('/webhook/vpn', methods=['POST'])
+def handle_payment():
+    try:
+        # Get vault values first to ensure we can access them
+        vault_values = get_vault_values()
+        logger.info(f"Processing webhook on endpoint: {vault_values['webhook_full_url']}")
+        
+        # Get the signature from headers
+        signature = request.headers.get('BTCPay-Sig')
+        if not signature:
+            logger.error("Missing BTCPay-Sig header")
+            return jsonify({"error": "Missing signature"}), 401
+            
+        # Verify signature
+        is_valid = verify_signature(request.get_data(), signature)
+        if not is_valid:
+            logger.error("Invalid signature")
+            return jsonify({"error": "Invalid signature"}), 401
+            
+        data = request.json
+        logger.info(f"Received webhook data: {data}")
+        
+        invoice_id = data.get('invoiceId')
+        if not invoice_id:
+            logger.error("Missing invoiceId in webhook data")
+            return jsonify({"error": "Missing invoiceId"}), 400
+            
+        # Remove __test__ prefix/suffix for test webhooks
+        if invoice_id.startswith('__test__') and invoice_id.endswith('__test__'):
+            invoice_id = invoice_id[8:-8]  # Strip the test markers
+            logger.info(f"Stripped test markers from invoice ID: {invoice_id}")
+        
+        # Get vault password from environment
+        vault_pass = os.getenv('ANSIBLE_VAULT_PASSWORD')
+        if not vault_pass:
+            raise Exception("Vault password not found in environment variables")
+        
+        # Create temporary vault password file for ansible-playbook
+        with tempfile.NamedTemporaryFile(mode='w', delete=False) as vault_pass_file:
+            vault_pass_file.write(vault_pass)
+            vault_pass_file.flush()
+            
+            cmd = [
+                'ansible-playbook',
+                str(PLAYBOOK_PATH),
+                '-i', str(INVENTORY_PATH),
+                '-e', f'invoice_id={invoice_id}',
+                '--vault-password-file', vault_pass_file.name,
+                '-vvv'  # Add verbose output
+            ]
+            
+            logger.info(f"Running ansible-playbook command: {' '.join(cmd)}")
+            
+            result = subprocess.run(
+                cmd,
+                capture_output=True,
+                text=True
+            )
+        
+        # Clean up the temporary file
+        os.unlink(vault_pass_file.name)
+        
+        # Log the complete output regardless of success/failure
+        logger.info(f"Ansible playbook stdout: {result.stdout}")
+        if result.stderr:
+            logger.error(f"Ansible playbook stderr: {result.stderr}")
+        
+        if result.returncode != 0:
+            error_msg = f"Ansible playbook failed with return code {result.returncode}"
+            logger.error(error_msg)
+            return jsonify({
+                "error": "Provisioning failed",
+                "details": error_msg,
+                "stdout": result.stdout,
+                "stderr": result.stderr
+            }), 500
+            
+        logger.info(f"Successfully processed invoice {invoice_id}")
+        return jsonify({
+            "status": "success",
+            "invoice_id": invoice_id,
+            "message": "VPN provisioning initiated"
+        })
+        
+    except Exception as e:
+        logger.error(f"Error processing webhook: {str(e)}")
+        return jsonify({
+            "error": str(e),
+            "traceback": traceback.format_exc()
+        }), 500
+
+if __name__ == '__main__':
+    # Verify we can read the vault and construct URL before starting
+    try:
+        vault_values = get_vault_values()
+        logger.info(f"Successfully loaded vault values")
+        logger.info(f"Configured webhook URL: {vault_values['webhook_full_url']}")
+    except Exception as e:
+        logger.error(f"Failed to load vault values: {str(e)}")
+        exit(1)
+        
+    logger.info(f"Starting webhook handler, watching for playbook at {PLAYBOOK_PATH}")
+    app.run(host='0.0.0.0', port=5000)

app/utils/vault_helper.py

@@ -0,0 +1,39 @@
+"""Helper functions for Ansible vault operations."""
+import os
+import tempfile
+import subprocess
+from pathlib import Path
+
+def decrypt_vault_file(vault_file_path):
+    """
+    Decrypt an Ansible vault file using the password from environment variables.
+    
+    Args:
+        vault_file_path (str): Path to the encrypted vault file
+        
+    Returns:
+        str: Decrypted contents of the vault file
+    """
+    vault_pass = os.getenv('ANSIBLE_VAULT_PASSWORD')
+    if not vault_pass:
+        raise ValueError("ANSIBLE_VAULT_PASSWORD environment variable not set")
+        
+    with tempfile.NamedTemporaryFile(mode='w', delete=False) as vault_pass_file:
+        vault_pass_file.write(vault_pass)
+        vault_pass_file.flush()
+        
+        try:
+            result = subprocess.run(
+                ['ansible-vault', 'view', str(vault_file_path)],
+                capture_output=True,
+                text=True,
+                env={**os.environ, 'ANSIBLE_VAULT_PASSWORD_FILE': vault_pass_file.name}
+            )
+            
+            if result.returncode != 0:
+                raise Exception(f"Failed to decrypt vault: {result.stderr}")
+                
+            return result.stdout
+            
+        finally:
+            os.unlink(vault_pass_file.name)

inventory.ini

@@ -0,0 +1,2 @@
+[vpn_servers]
+localhost ansible_connection=local

venv/bin/Activate.ps1

@@ -0,0 +1,247 @@
+<#
+.Synopsis
+Activate a Python virtual environment for the current PowerShell session.
+
+.Description
+Pushes the python executable for a virtual environment to the front of the
+$Env:PATH environment variable and sets the prompt to signify that you are
+in a Python virtual environment. Makes use of the command line switches as
+well as the `pyvenv.cfg` file values present in the virtual environment.
+
+.Parameter VenvDir
+Path to the directory that contains the virtual environment to activate. The
+default value for this is the parent of the directory that the Activate.ps1
+script is located within.
+
+.Parameter Prompt
+The prompt prefix to display when this virtual environment is activated. By
+default, this prompt is the name of the virtual environment folder (VenvDir)
+surrounded by parentheses and followed by a single space (ie. '(.venv) ').
+
+.Example
+Activate.ps1
+Activates the Python virtual environment that contains the Activate.ps1 script.
+
+.Example
+Activate.ps1 -Verbose
+Activates the Python virtual environment that contains the Activate.ps1 script,
+and shows extra information about the activation as it executes.
+
+.Example
+Activate.ps1 -VenvDir C:\Users\MyUser\Common\.venv
+Activates the Python virtual environment located in the specified location.
+
+.Example
+Activate.ps1 -Prompt "MyPython"
+Activates the Python virtual environment that contains the Activate.ps1 script,
+and prefixes the current prompt with the specified string (surrounded in
+parentheses) while the virtual environment is active.
+
+.Notes
+On Windows, it may be required to enable this Activate.ps1 script by setting the
+execution policy for the user. You can do this by issuing the following PowerShell
+command:
+
+PS C:\> Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
+
+For more information on Execution Policies: 
+https://go.microsoft.com/fwlink/?LinkID=135170
+
+#>
+Param(
+    [Parameter(Mandatory = $false)]
+    [String]
+    $VenvDir,
+    [Parameter(Mandatory = $false)]
+    [String]
+    $Prompt
+)
+
+<# Function declarations --------------------------------------------------- #>
+
+<#
+.Synopsis
+Remove all shell session elements added by the Activate script, including the
+addition of the virtual environment's Python executable from the beginning of
+the PATH variable.
+
+.Parameter NonDestructive
+If present, do not remove this function from the global namespace for the
+session.
+
+#>
+function global:deactivate ([switch]$NonDestructive) {
+    # Revert to original values
+
+    # The prior prompt:
+    if (Test-Path -Path Function:_OLD_VIRTUAL_PROMPT) {
+        Copy-Item -Path Function:_OLD_VIRTUAL_PROMPT -Destination Function:prompt
+        Remove-Item -Path Function:_OLD_VIRTUAL_PROMPT
+    }
+
+    # The prior PYTHONHOME:
+    if (Test-Path -Path Env:_OLD_VIRTUAL_PYTHONHOME) {
+        Copy-Item -Path Env:_OLD_VIRTUAL_PYTHONHOME -Destination Env:PYTHONHOME
+        Remove-Item -Path Env:_OLD_VIRTUAL_PYTHONHOME
+    }
+
+    # The prior PATH:
+    if (Test-Path -Path Env:_OLD_VIRTUAL_PATH) {
+        Copy-Item -Path Env:_OLD_VIRTUAL_PATH -Destination Env:PATH
+        Remove-Item -Path Env:_OLD_VIRTUAL_PATH
+    }
+
+    # Just remove the VIRTUAL_ENV altogether:
+    if (Test-Path -Path Env:VIRTUAL_ENV) {
+        Remove-Item -Path env:VIRTUAL_ENV
+    }
+
+    # Just remove VIRTUAL_ENV_PROMPT altogether.
+    if (Test-Path -Path Env:VIRTUAL_ENV_PROMPT) {
+        Remove-Item -Path env:VIRTUAL_ENV_PROMPT
+    }
+
+    # Just remove the _PYTHON_VENV_PROMPT_PREFIX altogether:
+    if (Get-Variable -Name "_PYTHON_VENV_PROMPT_PREFIX" -ErrorAction SilentlyContinue) {
+        Remove-Variable -Name _PYTHON_VENV_PROMPT_PREFIX -Scope Global -Force
+    }
+
+    # Leave deactivate function in the global namespace if requested:
+    if (-not $NonDestructive) {
+        Remove-Item -Path function:deactivate
+    }
+}
+
+<#
+.Description
+Get-PyVenvConfig parses the values from the pyvenv.cfg file located in the
+given folder, and returns them in a map.
+
+For each line in the pyvenv.cfg file, if that line can be parsed into exactly
+two strings separated by `=` (with any amount of whitespace surrounding the =)
+then it is considered a `key = value` line. The left hand string is the key,
+the right hand is the value.
+
+If the value starts with a `'` or a `"` then the first and last character is
+stripped from the value before being captured.
+
+.Parameter ConfigDir
+Path to the directory that contains the `pyvenv.cfg` file.
+#>
+function Get-PyVenvConfig(
+    [String]
+    $ConfigDir
+) {
+    Write-Verbose "Given ConfigDir=$ConfigDir, obtain values in pyvenv.cfg"
+
+    # Ensure the file exists, and issue a warning if it doesn't (but still allow the function to continue).
+    $pyvenvConfigPath = Join-Path -Resolve -Path $ConfigDir -ChildPath 'pyvenv.cfg' -ErrorAction Continue
+
+    # An empty map will be returned if no config file is found.
+    $pyvenvConfig = @{ }
+
+    if ($pyvenvConfigPath) {
+
+        Write-Verbose "File exists, parse `key = value` lines"
+        $pyvenvConfigContent = Get-Content -Path $pyvenvConfigPath
+
+        $pyvenvConfigContent | ForEach-Object {
+            $keyval = $PSItem -split "\s*=\s*", 2
+            if ($keyval[0] -and $keyval[1]) {
+                $val = $keyval[1]
+
+                # Remove extraneous quotations around a string value.
+                if ("'""".Contains($val.Substring(0, 1))) {
+                    $val = $val.Substring(1, $val.Length - 2)
+                }
+
+                $pyvenvConfig[$keyval[0]] = $val
+                Write-Verbose "Adding Key: '$($keyval[0])'='$val'"
+            }
+        }
+    }
+    return $pyvenvConfig
+}
+
+
+<# Begin Activate script --------------------------------------------------- #>
+
+# Determine the containing directory of this script
+$VenvExecPath = Split-Path -Parent $MyInvocation.MyCommand.Definition
+$VenvExecDir = Get-Item -Path $VenvExecPath
+
+Write-Verbose "Activation script is located in path: '$VenvExecPath'"
+Write-Verbose "VenvExecDir Fullname: '$($VenvExecDir.FullName)"
+Write-Verbose "VenvExecDir Name: '$($VenvExecDir.Name)"
+
+# Set values required in priority: CmdLine, ConfigFile, Default
+# First, get the location of the virtual environment, it might not be
+# VenvExecDir if specified on the command line.
+if ($VenvDir) {
+    Write-Verbose "VenvDir given as parameter, using '$VenvDir' to determine values"
+}
+else {
+    Write-Verbose "VenvDir not given as a parameter, using parent directory name as VenvDir."
+    $VenvDir = $VenvExecDir.Parent.FullName.TrimEnd("\\/")
+    Write-Verbose "VenvDir=$VenvDir"
+}
+
+# Next, read the `pyvenv.cfg` file to determine any required value such
+# as `prompt`.
+$pyvenvCfg = Get-PyVenvConfig -ConfigDir $VenvDir
+
+# Next, set the prompt from the command line, or the config file, or
+# just use the name of the virtual environment folder.
+if ($Prompt) {
+    Write-Verbose "Prompt specified as argument, using '$Prompt'"
+}
+else {
+    Write-Verbose "Prompt not specified as argument to script, checking pyvenv.cfg value"
+    if ($pyvenvCfg -and $pyvenvCfg['prompt']) {
+        Write-Verbose "  Setting based on value in pyvenv.cfg='$($pyvenvCfg['prompt'])'"
+        $Prompt = $pyvenvCfg['prompt'];
+    }
+    else {
+        Write-Verbose "  Setting prompt based on parent's directory's name. (Is the directory name passed to venv module when creating the virtual environment)"
+        Write-Verbose "  Got leaf-name of $VenvDir='$(Split-Path -Path $venvDir -Leaf)'"
+        $Prompt = Split-Path -Path $venvDir -Leaf
+    }
+}
+
+Write-Verbose "Prompt = '$Prompt'"
+Write-Verbose "VenvDir='$VenvDir'"
+
+# Deactivate any currently active virtual environment, but leave the
+# deactivate function in place.
+deactivate -nondestructive
+
+# Now set the environment variable VIRTUAL_ENV, used by many tools to determine
+# that there is an activated venv.
+$env:VIRTUAL_ENV = $VenvDir
+
+if (-not $Env:VIRTUAL_ENV_DISABLE_PROMPT) {
+
+    Write-Verbose "Setting prompt to '$Prompt'"
+
+    # Set the prompt to include the env name
+    # Make sure _OLD_VIRTUAL_PROMPT is global
+    function global:_OLD_VIRTUAL_PROMPT { "" }
+    Copy-Item -Path function:prompt -Destination function:_OLD_VIRTUAL_PROMPT
+    New-Variable -Name _PYTHON_VENV_PROMPT_PREFIX -Description "Python virtual environment prompt prefix" -Scope Global -Option ReadOnly -Visibility Public -Value $Prompt
+
+    function global:prompt {
+        Write-Host -NoNewline -ForegroundColor Green "($_PYTHON_VENV_PROMPT_PREFIX) "
+        _OLD_VIRTUAL_PROMPT
+    }
+    $env:VIRTUAL_ENV_PROMPT = $Prompt
+}
+
+# Clear PYTHONHOME
+if (Test-Path -Path Env:PYTHONHOME) {
+    Copy-Item -Path Env:PYTHONHOME -Destination Env:_OLD_VIRTUAL_PYTHONHOME
+    Remove-Item -Path Env:PYTHONHOME
+}
+
+# Add the venv to the PATH
+Copy-Item -Path Env:PATH -Destination Env:_OLD_VIRTUAL_PATH
+$Env:PATH = "$VenvExecDir$([System.IO.Path]::PathSeparator)$Env:PATH"

venv/bin/activate

@@ -0,0 +1,69 @@
+# This file must be used with "source bin/activate" *from bash*
+# you cannot run it directly
+
+deactivate () {
+    # reset old environment variables
+    if [ -n "${_OLD_VIRTUAL_PATH:-}" ] ; then
+        PATH="${_OLD_VIRTUAL_PATH:-}"
+        export PATH
+        unset _OLD_VIRTUAL_PATH
+    fi
+    if [ -n "${_OLD_VIRTUAL_PYTHONHOME:-}" ] ; then
+        PYTHONHOME="${_OLD_VIRTUAL_PYTHONHOME:-}"
+        export PYTHONHOME
+        unset _OLD_VIRTUAL_PYTHONHOME
+    fi
+
+    # This should detect bash and zsh, which have a hash command that must
+    # be called to get it to forget past commands.  Without forgetting
+    # past commands the $PATH changes we made may not be respected
+    if [ -n "${BASH:-}" -o -n "${ZSH_VERSION:-}" ] ; then
+        hash -r 2> /dev/null
+    fi
+
+    if [ -n "${_OLD_VIRTUAL_PS1:-}" ] ; then
+        PS1="${_OLD_VIRTUAL_PS1:-}"
+        export PS1
+        unset _OLD_VIRTUAL_PS1
+    fi
+
+    unset VIRTUAL_ENV
+    unset VIRTUAL_ENV_PROMPT
+    if [ ! "${1:-}" = "nondestructive" ] ; then
+    # Self destruct!
+        unset -f deactivate
+    fi
+}
+
+# unset irrelevant variables
+deactivate nondestructive
+
+VIRTUAL_ENV="/home/hashgate/vpn-btcpay-provisioner/venv"
+export VIRTUAL_ENV
+
+_OLD_VIRTUAL_PATH="$PATH"
+PATH="$VIRTUAL_ENV/bin:$PATH"
+export PATH
+
+# unset PYTHONHOME if set
+# this will fail if PYTHONHOME is set to the empty string (which is bad anyway)
+# could use `if (set -u; : $PYTHONHOME) ;` in bash
+if [ -n "${PYTHONHOME:-}" ] ; then
+    _OLD_VIRTUAL_PYTHONHOME="${PYTHONHOME:-}"
+    unset PYTHONHOME
+fi
+
+if [ -z "${VIRTUAL_ENV_DISABLE_PROMPT:-}" ] ; then
+    _OLD_VIRTUAL_PS1="${PS1:-}"
+    PS1="(venv) ${PS1:-}"
+    export PS1
+    VIRTUAL_ENV_PROMPT="(venv) "
+    export VIRTUAL_ENV_PROMPT
+fi
+
+# This should detect bash and zsh, which have a hash command that must
+# be called to get it to forget past commands.  Without forgetting
+# past commands the $PATH changes we made may not be respected
+if [ -n "${BASH:-}" -o -n "${ZSH_VERSION:-}" ] ; then
+    hash -r 2> /dev/null
+fi

venv/bin/activate.csh

@@ -0,0 +1,26 @@
+# This file must be used with "source bin/activate.csh" *from csh*.
+# You cannot run it directly.
+# Created by Davide Di Blasi <davidedb@gmail.com>.
+# Ported to Python 3.3 venv by Andrew Svetlov <andrew.svetlov@gmail.com>
+
+alias deactivate 'test $?_OLD_VIRTUAL_PATH != 0 && setenv PATH "$_OLD_VIRTUAL_PATH" && unset _OLD_VIRTUAL_PATH; rehash; test $?_OLD_VIRTUAL_PROMPT != 0 && set prompt="$_OLD_VIRTUAL_PROMPT" && unset _OLD_VIRTUAL_PROMPT; unsetenv VIRTUAL_ENV; unsetenv VIRTUAL_ENV_PROMPT; test "\!:*" != "nondestructive" && unalias deactivate'
+
+# Unset irrelevant variables.
+deactivate nondestructive
+
+setenv VIRTUAL_ENV "/home/hashgate/vpn-btcpay-provisioner/venv"
+
+set _OLD_VIRTUAL_PATH="$PATH"
+setenv PATH "$VIRTUAL_ENV/bin:$PATH"
+
+
+set _OLD_VIRTUAL_PROMPT="$prompt"
+
+if (! "$?VIRTUAL_ENV_DISABLE_PROMPT") then
+    set prompt = "(venv) $prompt"
+    setenv VIRTUAL_ENV_PROMPT "(venv) "
+endif
+
+alias pydoc python -m pydoc
+
+rehash

venv/bin/activate.fish

@@ -0,0 +1,69 @@
+# This file must be used with "source <venv>/bin/activate.fish" *from fish*
+# (https://fishshell.com/); you cannot run it directly.
+
+function deactivate  -d "Exit virtual environment and return to normal shell environment"
+    # reset old environment variables
+    if test -n "$_OLD_VIRTUAL_PATH"
+        set -gx PATH $_OLD_VIRTUAL_PATH
+        set -e _OLD_VIRTUAL_PATH
+    end
+    if test -n "$_OLD_VIRTUAL_PYTHONHOME"
+        set -gx PYTHONHOME $_OLD_VIRTUAL_PYTHONHOME
+        set -e _OLD_VIRTUAL_PYTHONHOME
+    end
+
+    if test -n "$_OLD_FISH_PROMPT_OVERRIDE"
+        set -e _OLD_FISH_PROMPT_OVERRIDE
+        # prevents error when using nested fish instances (Issue #93858)
+        if functions -q _old_fish_prompt
+            functions -e fish_prompt
+            functions -c _old_fish_prompt fish_prompt
+            functions -e _old_fish_prompt
+        end
+    end
+
+    set -e VIRTUAL_ENV
+    set -e VIRTUAL_ENV_PROMPT
+    if test "$argv[1]" != "nondestructive"
+        # Self-destruct!
+        functions -e deactivate
+    end
+end
+
+# Unset irrelevant variables.
+deactivate nondestructive
+
+set -gx VIRTUAL_ENV "/home/hashgate/vpn-btcpay-provisioner/venv"
+
+set -gx _OLD_VIRTUAL_PATH $PATH
+set -gx PATH "$VIRTUAL_ENV/bin" $PATH
+
+# Unset PYTHONHOME if set.
+if set -q PYTHONHOME
+    set -gx _OLD_VIRTUAL_PYTHONHOME $PYTHONHOME
+    set -e PYTHONHOME
+end
+
+if test -z "$VIRTUAL_ENV_DISABLE_PROMPT"
+    # fish uses a function instead of an env var to generate the prompt.
+
+    # Save the current fish_prompt function as the function _old_fish_prompt.
+    functions -c fish_prompt _old_fish_prompt
+
+    # With the original prompt function renamed, we can override with our own.
+    function fish_prompt
+        # Save the return status of the last command.
+        set -l old_status $status
+
+        # Output the venv prompt; color taken from the blue of the Python logo.
+        printf "%s%s%s" (set_color 4B8BBE) "(venv) " (set_color normal)
+
+        # Restore the return status of the previous command.
+        echo "exit $old_status" | .
+        # Output the original/"old" prompt.
+        _old_fish_prompt
+    end
+
+    set -gx _OLD_FISH_PROMPT_OVERRIDE "$VIRTUAL_ENV"
+    set -gx VIRTUAL_ENV_PROMPT "(venv) "
+end

venv/bin/ansible

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.adhoc import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-community

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible_collections.ansible_community import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-config

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.config import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-connection

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.scripts.ansible_connection_cli_stub import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-console

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.console import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-doc

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.doc import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-galaxy

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.galaxy import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-inventory

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.inventory import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-playbook

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.playbook import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-pull

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.pull import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/ansible-test

@@ -0,0 +1,45 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# PYTHON_ARGCOMPLETE_OK
+"""Command line entry point for ansible-test."""
+
+# NOTE: This file resides in the _util/target directory to ensure compatibility with all supported Python versions.
+
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import os
+import sys
+
+
+def main(args=None):
+    """Main program entry point."""
+    ansible_root = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+    source_root = os.path.join(ansible_root, 'test', 'lib')
+
+    if os.path.exists(os.path.join(source_root, 'ansible_test', '_internal', '__init__.py')):
+        # running from source, use that version of ansible-test instead of any version that may already be installed
+        sys.path.insert(0, source_root)
+
+    # noinspection PyProtectedMember
+    from ansible_test._util.target.common.constants import CONTROLLER_PYTHON_VERSIONS
+
+    if version_to_str(sys.version_info[:2]) not in CONTROLLER_PYTHON_VERSIONS:
+        raise SystemExit('This version of ansible-test cannot be executed with Python version %s. Supported Python versions are: %s' % (
+            version_to_str(sys.version_info[:3]), ', '.join(CONTROLLER_PYTHON_VERSIONS)))
+
+    if any(not os.get_blocking(handle.fileno()) for handle in (sys.stdin, sys.stdout, sys.stderr)):
+        raise SystemExit('Standard input, output and error file handles must be blocking to run ansible-test.')
+
+    # noinspection PyProtectedMember
+    from ansible_test._internal import main as cli_main
+
+    cli_main(args)
+
+
+def version_to_str(version):
+    """Return a version string from a version tuple."""
+    return '.'.join(str(n) for n in version)
+
+
+if __name__ == '__main__':
+    main()

venv/bin/ansible-vault

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from ansible.cli.vault import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/dotenv

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from dotenv.__main__ import cli
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(cli())

venv/bin/flask

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from flask.cli import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/pip

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from pip._internal.cli.main import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/pip3

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from pip._internal.cli.main import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/pip3.11

@@ -0,0 +1,8 @@
+#!/home/hashgate/vpn-btcpay-provisioner/venv/bin/python3
+# -*- coding: utf-8 -*-
+import re
+import sys
+from pip._internal.cli.main import main
+if __name__ == '__main__':
+    sys.argv[0] = re.sub(r'(-script\.pyw|\.exe)?$', '', sys.argv[0])
+    sys.exit(main())

venv/bin/python

@@ -0,0 +1 @@
+python3

venv/bin/python3

@@ -0,0 +1 @@
+/usr/bin/python3

venv/bin/python3.11

@@ -0,0 +1 @@
+python3

venv/lib64

@@ -0,0 +1 @@
+lib

venv/pyvenv.cfg

@@ -0,0 +1,5 @@
+home = /usr/bin
+include-system-site-packages = false
+version = 3.11.2
+executable = /usr/bin/python3.11
+command = /usr/bin/python3 -m venv /home/hashgate/vpn-btcpay-provisioner/venv